|
MODEL: QXT-85-15-ATTIC, Body Serial #94163
DIMENSIONS:
Nominal Length: 15
Inside
Height: 85
Inside Width: 92
Outside Width: 96
CLEAR DOOR OPENING: 78(H) X 87 Ύ(W)
- Pre-painted white aluminum panels
- Bonded Body
- .032 Aluminum roof
- 4 Crossills on 16 centers, 80,000 lb. yield
- 6 channel longsills
- 1 1/8 Laminated hardwood floor, varnished
- 3/8 plywood full height on sides, 1/2 plywood full height on
front, varnished
- Five(5) rope tie rings per side, 40 to center
- Rollup rear door, rust free package, & side seals
- Grabhandle, right and left rear
- Stainless steel rear door frame, standard flat steel sill
- Full width drop step bumper, with 11 Ύ grip-strut step
- Two(2) domelights with cab switch
- 36 attic lined with 3/8 plywood
- One(1) fuel fill adapter thru rubrail
- Aluminum sheet skirting, painted white
- Useable C.A. is 108, frame width is 34
- Bottom of attic to bottom of longsills is 49 ½
- On Sale for $4,995.00, originally listed at
$6,757.00
|
|
|
MODEL: QXT-103-26-102, Body Serial #96479
DIMENSIONS:
Nominal Length: 26
Inside
Height: 103
Inside Width: 98
Outside Width: 102
CLEAR DOOR OPENING: 96(H) X 93 Ύ(W)
- Pre-painted white aluminum panels
- Bonded Body
- Translucent roof
- 4 Crossills on 12 centers, 80,000 lb. yield
- 4 channel longsills
- Crossmembers on 6 centers, rear 3' of body
- 1 3/8 Laminated hardwood floor, Satin finish sealer
- 3/8 plywood full height on sides, 1/2 plywood full height on front, varnished
- Two(2) rows E-track, recessed on sides only at 24 & 48 to center
- 12 14 Gauge smooth steel scuff liner, sides and front
- Rollup rear door, rust free package, & side seals
- Vinyl coated grabhandle, right and left rear
- Stainless steel corner irons in upper rear corners for extra height reinforcement
- Stainless steel rear door frame, standard flat steel sill
- (2) domelights with rear switch, hot-wired, located below bottom row of E-track
- (1) spotlight, mounted high streetside rear, outside of body facing rearward, with cab switch and indicator
- Curbside, single panel swing side door, 40 ¾(W), with standard bar lock and step, hinged at front, located 66 back from inside front
- Conspicuity tape on side rubrails
- 12 x 12 TreadBrite aluminum rock guards on lower front corners
- Useable C.A. is 203 , frame width is 34
- On Sale for $10,995.00
|
|
|
MODEL: FRP-SB-79-14, Body Serial #96789
DIMENSIONS:
Nominal Length: 14
Inside
Height: 79
Inside Width: 93"
Outside Width: 96
CLEAR DOOR OPENING: 72(H) X 87 Ύ(W)
- FRP 1/2" Exterior
- Aluminum roof
- 4 Crossills on 12 centers, 80,000 lb. yield
- Flat wood-filled longsills
- 1 3/8 Laminated ALL OAK hardwood floor, Satin finish sealer
- Bulkhead: FRP set back 60" from front and sealed
- Two panel full opening swing rear doors, with Polar H.D. Dead Bold Lock with inside release, key-lockable
- Curbside single panel swing side door, full forward position, 42"(W) x 72"(H), with Polar H.D. Dead Bold Lock with inside release, key-lockable
- Streetside single panel swing side door, full forward position, 42"(W) x 72"(H), with Polar H.D. Dead Bold Lock with inside release, key-lockable
- Full width drop step bumper with 11 3/4" grip-strut step base step, and 4" grip-strut intermediate step, skirt with treadplate steel, surface mount OEM tail lights
- Curbside and Streetside Mirror Image Compartments; rear vertical compartments full rearward with base at bottom of skirt, door opening to be 26(W) x 40(H), Eberhard two-point, paddle handle lock, two(2) adjustable galvanized shelves each compartment, appropriate door hold-back, center horizontal compartments runs forward from rear compartment to front bulkhead, floor base of compartment, door opening to be 62(W) x 18(H), top of door matches rear compartment, galvanized slottetd divider shelf divides compartment vertically, Eberhard two-point paddle handle locking hinge-down door with chains, all doors are remote keyless entry with key override, all compartments have aluminum drop-rails, compartment interiors are FRP and extruded aluminum, useable depth to be 20 5/8, compartment tops have lip to secure freight
- RV Type aluminum roof access ladder at rear curbside
- Three(3) ladder rack crossbars, round aluminum type, secured to top rail
- Body painted to match GM#74U Red
- One(1) fuel fill adapter streetside in skir
- Delta-Waseca Custom Fabricated H.D. Aluminum walkboard, with stow position hardware provided
- Conspicuity tape on side rubrails
- 12 x 12 TreadBrite aluminum rock guards on lower front corners
- Useable C.A. is 108, frame width is 34
- Service Body Only On Sale for $14,578.00
- Chassis and body on Sale for $48,938.00
- Chevrolet C5500, 19500 GVWR, 2007 - New, with inboard rear fuel tank
- Contact GARY 'Scott' SAMS at Karl Chevrolet in Ankeny, IA for the complete truck
|
|
|
